Product characteristics:

1. A people-oriented design concept that meets the functional, ergonomic, and aesthetic requirements of the workstation environment

2. Flexible equipment layout can bring great convenience to other devices such as the multi screen display environment and system operation of the intelligent control center application< br/>
3. Efficient ventilation system; High level of structural performance; Task oriented configuration

4. Main frame: The main frame is supported by adjustable horizontal fixed feet. The structural components are made of precision cast cold rolled steel to ensure rigidity and squareness. The surface is treated with wear-resistant electric spray

5. Back wall: The back wall of the main control desk is assembled in a combination of sheet metal and aluminum profiles. The back wall is fixed to the back beam through sheet metal parts, and the display can be hung on the aluminum profile

6. Panel support frame: There are support arms on both sides of the lower part of the panel, and arrow slots are opened between the two large panels. The two ends of the panel must be connected by pull rods, and the overall connection must be smooth and seamless.

7. Materials and processing: Each component in the frame structure should be stamped and bent using first grade cold rolled steel plates, the main frame should be processed using first grade cold rolled steel plates with a thickness of no less than 2mm, and the load-bearing beam components should be processed using first grade cold rolled steel plates with a thickness of no less than 3mm. The outer surface should be sprayed with electrostatic plastic powder

8. Main frame front and rear door panels: The front and rear door panels are made of first grade cold rolled steel plates with a thickness of ≥ 1.2mm, which should have advantages such as damping, light weight, good hand feel, and low noise when opening and closing the door, ensuring that they can be opened without obstacles 100000 times. At the same time, the installation method of the hinge must be fast installation, easy to install and disassemble

9. Error requirement: Linear within ± 0.5 mm (including this number); Vertical ± 0.5 ° (including the original number)